- Precautions for use of inverted wire drawing machine
Source:本站 | Release Date:
2022-08-10 09:06:48
| Views:196
Summary:
The appearance of the inverted wire drawing machine perfectly solves the output problems of some related industries, not only simplifies the work steps, but also greatly shortens the work cycle, the speed regulation is convenient and simple, significa…
The appearance of the inverted wire drawing machine perfectly solves the output problems of some related industries, not only simplifies the work steps, but also greatly shortens the work cycle, the speed regulation is convenient and simple, significantly improves the production efficiency, and effectively reduces the production cost.
However, when we operate and use the inverted wire drawing machine, we need to meet the following conditions, otherwise the production quality of the entire product may be affected, the expected effect cannot be effectively met, and in severe cases, it will directly lead to the damage of the inverted wire drawing machine.
First of all, in the process of using the inverted wire drawing machine, pay attention to regularly check its daily lubrication effect, whether each circuit is completely normal, and whether all joints are in contact. If any bad phenomena such as broken skin and aging are found, they should be dealt with in time.
Secondly, before opening the inverted wire drawing machine, it is necessary to ensure that the air pressure of the fuselage is normal, the fuselage is not loose and deformed, and the wear is within an acceptable range.
After that, before operating the inverted wire drawing machine, the staff also needs to master the correct operation method, otherwise they cannot operate it alone. If it is a pulling die and a hook dragging the chain, the operator needs to monitor in front of the panel to avoid idle personnel from approaching the equipment, causing personal injury, or causing casualties due to improper operation.
In addition, it is also necessary to ensure that the inverter cannot exceed the maximum power and cannot exceed the specified parameter range of the compression ratio during the entire operation of the inverted wire drawing machine, so as to avoid damage to the motor and transmission system due to overload operation.
When the inverted wire drawing machine stops running, corresponding maintenance needs to be carried out to ensure the cleanliness of the entire workbench and create a good working environment.
